简支饱和多孔弹性梁的非线性弯曲

基于饱和多孔介质理论和弹性梁的大挠度弯曲假设,在多孔弹性梁轴线不可伸长,孔隙流体仅沿轴向方向扩散的限制下,建立了微观不可压饱和多孔弹性梁大挠度拟静态响应的一维非线性数学模型.在此基础上,利用Galerkin截断法,分析了两端可渗透的简支多孔弹性梁在突加横向均布载荷作用下的非线性弯曲,给出了梁弯曲时挠度、弯矩以及孔隙流体压力等效力偶随时间的响应曲线.数值结果表明:当载荷较小时,大挠度非线性与小挠度线性理论的结果相差很小,而当载荷较大时,非线性大挠度理论的结果小于相应线性小挠度理论的结果,并且这种差异随着载荷的增大而增大.同时,在载荷突加于梁上时,多孔弹性梁骨架起初不变形,孔隙流体压力等效力偶由零突增为非零,其值与外载荷保持平衡.随着时间的增加,梁的挠度增加,等效力偶逐渐减小为零,最终多孔梁骨架承担全部的外载荷.     

THE CONSTRUCTION OF WAVELET-BASED TRUNCATED CONICAL SHELL ELEMENT USING B-SPLINE WAVELET ON THE INTERVAL

Based on B-spline wavelet on the interval (BSWI), two classes of truncated conicalshell elements were constructed to solve axisymmetric problems, i.e. BSWI thin truncated conicalshell element and BSWI moderately thick truncated conical shell element with independent slope-deformation interpolation. In the construction of wavelet-based element, instead of traditionalpolynomial interpolation, the scaling functions of BSWI were employed to form the shape functionsthrough the constructed elemental transformation matrix,and then construct BSWI element viathe variational principle. Unlike the process of direct wavelets adding in the wavelet Galerkinmethod, the elemental displacement field represented by the coefficients of wavelets expansionwas transformed into edges and internal modes via the constructed transformation matrix. BSWIelement combines the accuracy of B-spline function approximation and various wavelet-basedelements for structural analysis. Some static and dynamic numerical examples of conical shellswere studied to demonstrate the present element with higher efficiency and precision than thetraditional element.     

Three-dimensional stability of a rectangular plate under uniaxial tension

The paper studies the three-dimensional stability of an isotropic, linear elastic, rectangular plate under a uniform tensile load applied to its sides. The concept of free strains is used to reduce the three-dimensional problem to a two-dimensional one. It is solved using the three-dimensional linearized theory of stability. An approximate solution of the buckling problem is obtained by the finite-difference method. Numerical results are presented __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 7, pp. 116–123, July 2006.     

The Existence Stability and Approximate Expressions of Periodic Solutions of Strongly Nonlinear Nonautonomous Systems with Multi-Degree-of-Freedom

Based upon the conservation of average energy a theorem about the periodic solutions of strongly nonlinear nonautomous systems with multi-degree-of freedom is proved. This theorem can not only decide the existence and stability of the periodic solutions, but at the same time can also give their first-order and second-order approximate expressions.     

杂交元本征应力模式和应力子空间的性质研究

详细讨论了有限元本征应力模式和应力子空间的性质，并着重讨论和进一步完善了与杂交应力有限元应力子空间有关的一些定理，为提出新方法提供了理论基础，主要包括：（1）证明了杂交元特征值不大于对应位移元的特征值；（2）证明了矩阵H非奇异的充分必要条件是假设应力模式线性无关；（3）证明了杂交元所对应位移元的本征应力模式形成的杂交元与该位移元相同；（4）证明了等价假设应力模式形成相同的杂交元；（5）证明了确定杂交元本征应力模式的充分必要条件是其范数平方等于所形成杂交元的变形模态特征值；（6）证明了杂交元假设应力模式与变形模态的能量一一对应的充分必要条件是假设应力模式彼此正交且与所对应位移元的本征应力模式除了一一对应者之外都正交。     

三维间断位移法及强奇异和超奇异积分的处理方法

从积分方程Somigliana等式出发,导出三维状态下单位位错集度的基本解.在此基础上,建立了边界积分方程,并给出了其离散形式.对强奇异和超奇异积分,采用了Hadamard定义的有限部分积分来处理.最后,给出了计算裂纹应力强度因子的算例,并与解析解进行了比较,证实了该方法的有效性.     

点式压电智能结构的模型修正与振动主动控制

提出了在点式压电智能结构中应用摄动有限元方法对结构的有限元模型进行修正 ,从而达到提高建模精度 ,改善实际结构振动主动控制效果的目的。通过对一悬臂梁在模型修正前后进行振动主动控制的不同的控制效果验证了该方法的有效性     

Reliable solutions to the problem of periodic oscillations of an elastoplastic beam

We consider time-periodic oscillations of a beam with a spatially inhomogeneous Prandtl–Ishlinskii constitutive law describing the elastoplastic hysteresis. The data (mass density, Prandtl–Ishlinskii distribution, external load) are assumed to be uncertain. It is shown that a unique solution exists and is stable with respect to the data variation. Considering the total dissipated energy as a measure for the accumulated material fatigue, we identify and estimate from above the ‘worst scenario’ case, where the dissipation over one period is maximal within an admissible set of data obtained from inaccurate measurements.     

Interval analysis method and convex models for impulsive response of structures with uncertain-but-bounded external loads

Two non-probabilistic, set-theoretical methods for determining the maximum and minimum impulsive responses of structures to uncertain-but-bounded impulses are presented. They are, respectively, based on the theories of interval mathematics and convex models. The uncertain-but-bounded impulses are assumed to be a convex set, hyper-rectangle or ellipsoid. For the two non-probabilistic methods, less prior information is required about the uncertain nature of impulses than the probabilistic model. Comparisons between the interval analysis method and the convex model, which are developed as an anti-optimization problem of finding the least favorable impulsive response and the most favorable impulsive response, are made through mathematical analyses and numerical calculations. The results of this study indicate that under the condition of the interval vector being determined from an ellipsoid containing the uncertain impulses, the width of the impulsive responses predicted by the interval analysis method is larger than that by the convex model; under the condition of the ellipsoid being determined from an interval vector containing the uncertain impulses, the width of the interval impulsive responses obtained by the interval analysis method is smaller than that by the convex model.The project supported by the National Outstanding Youth Science Foundation of China (10425208), the National Natural Science Foundation of China and Institute of Engineering Physics of China (10376002) The English text was polished by Keren Wang.     

Large thermal deflections of Timoshenko beams under transversely non-uniform temperature rise

Geometrically non-linear deformation of axially extensional Timoshenko beams subjected mechanical as well thermal loadings were characterized by a system of 7 coupled and highly non-linear ordinary differential equations, which results in a complicated two-point boundary-value problem. By using shooting method this kind of problem can be numerically solved efficiently. Based on the above-mentioned mathematical formulation and numerical procedure, analysis of large thermal deflections for Timoshenko beams, subjected transversely non-uniform temperature rise and with immovably pinned–pinned as well as fixed–fixed ends, is presented. Characteristic curves showing the relationships between the beam deformation and temperature rise are illustrated. Especially, the effects of shear deformation on the bending and buckling response are quantitatively investigated. The numerical results show, as we know, that shear deformation effects become significant with the decrease of the slenderness and with the increase of the shear flexibility.